فلمنت بي ال ايه مع جلاس فايبر بنسبة 16%
The printing filament developed on the basis of PLA is added with 16% glass fiber, which greatly enhances the rigidity and impact resistance of ordinary PLA. The bending modulus is as high as 4400MPa, which is highly rigid and not easy to distort;
Description
High impact resistance and good printability of PLA; Suitable for mechanical parts prototypes with requirements for rigidity and impact resistance; Wear-resistant performance makes it suitable for printing gears and can be used as temporary functional parts.
Sellingpoint
High rigidity
High impact resistance
High wear resistance
Excellent printability
Notes
1. ePLA-GF line has strong rigidity and is not easy to bend. In the feeding pipeline, excessive bending of filament should be avoided as far as possible
2. ePLA-GF is very easy to grind the nozzle and extruder gear. It is recommended to use hardened steel nozzle or ruby nozzle. If conditions permit, hardened steel extruder gear can be selected. If the printing time is long and the plug occurs, the throat and nozzle need to be replaced
3. The blowing fan can be properly turned off to improve the model strength
Filament Properties Table
3D PRINTING FILAMENTePLA-GF
Density(g/cm3)1.31
Heat Distortion Temp(℃,0.45MPa)565/10
Melt Flow Index(g/10min)6.36190℃/2.16kg
Tensile Strength(MPa)59.27
7/10Elongation at Break(%)7.99
1/10Flexural Strength(MPa)85.01
8/10Flexural Modulus(MPa)4414.89
8/10IZOD Impact Strength(kJ/)10.16
2/10Durability4/10Printability9/10
Recommended printing parameters
Extruder Temperature(℃):190 – 230℃
Recommended temperature215℃
Bed temperature(℃) 45 – 60°C
Fan Speed 100%
Printing Speed: 40 – 100mm/s
Heated Bed: Optional
Recommended Build Surfaces: Masking paper, PVP solid glue, PEI
Feature
Flexible——
Elastic——
Impact Resistant√
Soft——
Composite√
UV Resistant——
Water Resistant——
Dissolvable——
Heat Resistant——
Chemically Resistant——
Fatigue Resistant——
Need drying——
Heated Bed Required——
Print recommend——