📝 Enhance your 3D printing results with Xtreme Lock, a professional 3D printer bed adhesive proudly made in Canada, designed to provide strong and reliable adhesion for a wide range of 3D printing materials using a single product.
✨ Xtreme Lock helps reduce print failures caused by poor bed adhesion while improving first-layer stability, delivering more accurate and consistent prints—even with advanced engineering materials and heated bed temperatures up to 150°C.
💧 Its easy-to-apply formula is simple to clean using water or Isopropyl Alcohol (IPA), making it an ideal choice for professionals, print farms, educational institutions, and hobbyists looking for dependable performance.
⭐ Key Features
✅ One adhesive for most 3D printing materials.
✅ Helps reduce warping, lifting, and adhesion-related print failures.
✅ Improves first-layer quality and consistency.
🔥 Supports heated bed temperatures up to 150°C.
🧵 Compatible Materials:
- PLA
- PETG
- ABS
- ASA
- Nylon
- PC (Polycarbonate)
- PEI / ULTEM
- PEEK
- PPSU
🧼 Easy to apply and clean with water or Isopropyl Alcohol (IPA).
🏭 Ideal for professional 3D printers, print farms, and production environments.
⚙️ Technical Specifications
🔹 Appearance: Clear, slightly blue viscous liquid.
🔹 Odor: Alcohol-like.
🧪 Main Ingredient: 2-Propanol (>50%).
⚠️ Safety Classification: Flammable Liquid – Category 2.
📦 Available Sizes
🧴 Xtreme Lock – 50ml
✔️ Ideal for trial use and personal projects.
✔️ An economical choice for new users.
🧴 Xtreme Lock – 120ml
✔️ Perfect for frequent users and print farms.
✔️ Enough for 300+ prints on a standard-sized print bed.
📖 Directions for Use
1️⃣ Shake the bottle well before use.
2️⃣ Apply a thin, even layer to the print bed surface.
3️⃣ Allow it to dry for a few seconds.
4️⃣ Start your print.
5️⃣ After printing, clean the print bed with water or Isopropyl Alcohol (IPA).
🛡️ Safety Instructions
⚠️ Highly flammable liquid and vapor.
🌬️ Use only in a well-ventilated area.
👁️ Avoid contact with eyes and avoid inhaling vapors.
🔥 Keep away from heat, sparks, and open flames.
💦 If product gets into the eyes: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing and seek medical attention if irritation persists.