eSUN PLA-Matte Strawberry Red is a matte PLA filament for FDM 3D printing, supplied in 1.75mm diameter and 1kg net weight. It provides a fine, uniform low-gloss surface with easy printing and low shrinkage.
⭐ Smooth matte finish, easy support removal and print speeds up to 200 mm/s.
Compatible with FDM printers that support PLA-Matte, 1.75mm filament and nozzle temperatures up to 230°C, including:
✅ Bambu Lab ✅ Creality ✅ Prusa ✅ Anycubic ✅ ELEGOO ✅ Other Brand
🔹 Bambu Lab: AMS systems support PLA Matte, subject to suitable spool dimensions and third-party filament settings.
🔹 Creality: CFS and CFS Lite support PLA subject to suitable spool requirements.
🔹 Anycubic: PLA Matte has compatibility limitations in ACE Pro, while ACE 2 Pro supports PLA.
🔹 Prusa: MMU3 supports PLA.
📦 Product Information
🔹 Brand: eSUN
🔹 Product: PLA-Matte
🔹 Material: PLA
🔹 Color: Strawberry Red
🔹 Diameter: 1.75mm.
🔹 Net Weight: 1kg.
🔹 Spool Type: Plastic spool.
⭐ Why Choose eSUN PLA-Matte?
🔹 A fine and uniform matte surface reduces reflections and provides a clean visual finish.
🔹 Optimized support adhesion allows easier removal with a smoother contact surface.
🔹 Easy printing with low shrinkage and resistance to warping and cracking according to eSUN.
🔹 In CubicSky's product images, Strawberry Red appears as a coral strawberry-red tone with a subtle pink cast and a soft matte appearance.
⚙️ Printing Settings
🔹 Nozzle Temperature: 190–230°C.
🔹 Bed Temperature: 45–60°C.
🔹 Fan: 100%.
🔹 Print Speed: Up to 200 mm/s.
💡 Recommendations and Conditions of Use
🔹 Drying: 50°C for more than 8 hours.
🔹 PLA-Matte is softer than some other filaments; avoid excessive extruder gear tension.
🔹 Keep the printer enclosure open when ambient temperature is high while printing PLA to help reduce heat around the extrusion area.
🔹 Store the filament in a dry, tightly closed environment after use.
🔗 Filament Storage Bags and Moisture-Absorbing Silica
📊 Technical Specifications
🔹 Density: 1.329 g/cm³.
🔹 Melt Flow Index: 5.8 g/10min at 190°C / 2.16kg.
🔹 Heat Distortion Temperature: 51°C at 0.45 MPa.
🔹 Tensile Strength XY: 25.976 MPa.
🔹 Tensile Strength Z: 14.31 MPa.
🔹 Elongation at Break XY: 7.23%.
🔹 Elongation at Break Z: 2.26%.
🔹 Flexural Strength XY: 42.6 MPa.
🔹 Flexural Strength Z: 21.1 MPa.
🔹 Flexural Modulus XY: 2249.05 MPa.
🔹 Flexural Modulus Z: 1782.62 MPa.
🔹 IZOD Impact Strength XY: 4.7 kJ/m².
🔹 IZOD Impact Strength Z: 2.15 kJ/m².
🧩 Applications
🔹 Decoration, cosplay, toys, models and early prototypes that benefit from a matte surface finish.
🛡️ Safety and Documents
🔹 An official SDS is available for PLA-Matte, and the series is included within the sample scope of SGS REACH and RoHS reports.
For technical datasheets, printing settings and CubicSky support guides, see:
🔗 3D Printing Materials Settings and Technical Support Guide
📚 Official Sources and Documents
🔗 Official eSUN PLA-Matte Product Page
🔗 Bambu Lab PLA Matte Compatibility
🔗 Creality CFS Lite Compatibility
🎥 Video