eSUN PLA-Matte Dark Grey is a matte PLA filament for FDM 3D printing, supplied in a 1.75mm diameter with a 1kg net weight. It delivers a smooth, low-glare matte finish that helps reduce visible layer lines, together with easy printing, low shrinkage, stable extrusion and effortless support removal. Suitable for artistic models, decorations and prototypes, it supports printing speeds up to 200 mm/s.
⭐ eSUN PLA-Matte combines a smooth matte finish, easy printing, stable extrusion and low warping, with effortless support removal and consistent surface quality for decorative and creative projects.
Compatible with FDM printers supporting PLA, 1.75mm filament and nozzle temperatures up to 230°C, including printers from:
✅ Bambu Lab ✅ Creality ✅ Prusa ✅ Anycubic ✅ ELEGOO ✅ Other Brand
🔹 Bambu Lab: AMS, AMS Lite, AMS 2 Pro and AMS HT support PLA, subject to spool dimensions and third-party filament settings.
🔹 Creality: CFS and CFS Lite support PLA, subject to compatible spool dimensions and printers.
🔹 Anycubic: PLA Matte may experience compatibility limitations inside ACE Pro that affect printing stability and quality. Anycubic recommends using a dedicated printer for PLA Matte and avoiding concurrent printing with other materials.
🔹 Prusa: MMU3 supports PLA, subject to printer and feeding-system compatibility.
📦 Product Information
🔹 Brand: eSUN
🔹 Product: PLA-Matte
🔹 Material: PLA
🔹 Color: Dark Grey.
🔹 Filament Diameter: 1.75mm.
🔹 Net Weight: 1kg.
🔹 Spool Type: Plastic spool.
⭐ Why Choose eSUN PLA-Matte?
🔹 A smooth, low-reflection matte finish gives printed models a uniform appearance and helps minimize visible layer lines.
🔹 Easy printability with low shrinkage, reduced warping and cracking, making it suitable for relatively large decorative models.
🔹 Easy support removal helps preserve smooth contact surfaces and reduce marks left during removal.
🔹 Stable extrusion and good layer adhesion help maintain consistent print quality during longer printing projects.
🔹 Supports printing speeds up to 200 mm/s with suitable equipment and settings.
🔹 Dark Grey features a deep slate-grey shade with a subtle cool blue undertone and a smooth, low-glare matte finish, suitable for artistic figures, architectural models and modern decorations.
⚙️ Recommended Printing Settings
🌡️ Nozzle Temperature: 190–230°C.
🛏️ Bed Temperature: 45–60°C.
💨 Cooling Fan: 100%.
🏃 Print Speed: Up to 200 mm/s.
💡 Printing Recommendations and Usage Conditions
🔹 Drying: 50°C for more than 8 hours when needed, according to the official TDS.
🔹 PLA-Matte is relatively soft. Avoid excessive extruder gear tension, as it may affect filament feeding and printing quality.
🔹 Keep the printer enclosure open when printing PLA-Matte. If ambient temperatures exceed 32°C, cool the printing environment to reduce filament softening and potential feeding issues.
🔹 For improved surface quality, optimize Z seam alignment, layer starting points and travel paths, and reduce printing speed when necessary.
🔹 Store the filament in a dry, airtight container or sealed bag with desiccant after use.
🔗 Filament Storage Bags and Moisture-Absorbing Silica
📊 Technical Specifications
🔹 Density: 1.329 g/cm³.
🔹 Melt Flow Index (MFI): 5.8 g/10min at 190°C / 2.16kg.
🔹 Heat Distortion Temperature (HDT): 51°C at 0.45 MPa.
🔹 Tensile Strength XY: 25.976 MPa.
🔹 Tensile Strength Z: 14.31 MPa.
🔹 Elongation at Break XY: 7.23%.
🔹 Elongation at Break Z: 2.26%.
🔹 Flexural Strength XY: 42.6 MPa.
🔹 Flexural Strength Z: 21.1 MPa.
🔹 Flexural Modulus XY: 2249.05 MPa.
🔹 Flexural Modulus Z: 1782.62 MPa.
🔹 IZOD Impact Strength XY: 4.7 kJ/m².
🔹 IZOD Impact Strength Z: 2.15 kJ/m².
🧩 Applications
🔹 Artistic figures and matte-finish decorations.
🔹 Architectural and educational models.
🔹 Cosplay props and printed accessories.
🔹 Creative projects and early-stage prototypes.
🛡️ Safety and Documentation
🔹 An official SDS is available for PLA-Matte, and the series is included within the tested sample scope of SGS REACH and RoHS reports.
🔹 Print in a well-ventilated area and follow suitable handling and storage precautions.
For technical datasheets, printing settings and CubicSky support guides, see:
🔗 3D Printing Materials Settings and Technical Support Guide
📚 Official Sources and Documents
🔗 Official eSUN PLA-Matte Product Page
🔗 Official Technical Data Sheet (TDS)
🔗 Bambu Lab AMS 2 Pro PLA Compatibility
🔗 Creality CFS Lite Compatibility Guide
🔗 Anycubic ACE Pro PLA Matte Compatibility Notes
🎥 Video