eSUN PLA-Matte Dual Black Red is a dual-color matte PLA filament for FDM 3D printing, supplied in 1.75mm diameter with a 1kg net weight. It combines two distinct colors in one filament with a smooth matte surface, reduced layer-line visibility and excellent printability.
⭐ Dual-color construction in a single filament with a matte finish and a visual effect that changes with model orientation and viewing angle.
Compatible with FDM printers that support PLA, 1.75mm filament and nozzle temperatures up to 230°C, including printers from:
✅ Bambu Lab ✅ Creality ✅ Prusa ✅ Anycubic ✅ ELEGOO ✅ Other Brand
🔹 Bambu Lab: AMS, AMS Lite, AMS 2 Pro and AMS HT officially support PLA, subject to the supported spool dimensions of each system. On AMS Lite, third-party filaments such as eSUN require manual material configuration.
🔹 Creality: CFS officially supports PLA subject to spool dimensions. CFS Lite also supports PLA and explicitly lists eSUN among compatible third-party spool brands within the specified dimensions.
🔹 Anycubic: ACE Pro supports PLA, but Anycubic notes potential compatibility limitations with PLA Matte and recommends avoiding concurrent printing with other materials for optimum stability. ACE 2 Pro officially supports PLA.
🔹 Prusa: MMU3 officially supports PLA.
📦 Product Information
🔹 Brand: eSUN
🔹 Product: PLA-Matte Dual
🔹 Material: PLA
🔹 Color: Black Red
🔹 Color Group: Black, Red, Multicolor
🔹 Diameter: 1.75mm
🔹 Net Weight: 1kg
🔹 Spool Type: Plastic spool.
⭐ Why Choose eSUN PLA-Matte Dual?
🔹 Dual-color filament construction creates distinct color changes depending on surface orientation and viewing angle.
🔹 Fine matte texture helps reduce visible layer lines and gives prints a smooth, consistent appearance.
🔹 Low shrinkage and excellent printability with reduced risk of warping or cracking.
🔹 Suitable for decorations, cosplay, toys, models, creative projects and rapid prototypes.
🔹 Black Red appears visually as matte charcoal black paired with a saturated crimson red, with the dominant color changing clearly across different model surfaces.
⚙️ Printing Settings
🔹 Nozzle Temperature: 215–230°C
🔹 Bed Temperature: 45–60°C
🔹 Fan: 100%
🔹 Print Speed: Up to 200 mm/s
💡 Recommendations and Usage Conditions
🔹 PLA-Matte Dual is softer than some other filaments; avoid excessive extruder tension to maintain stable feeding and print quality.
🔹 For enclosed printers, eSUN recommends keeping the enclosure open while printing PLA, particularly when ambient temperature exceeds 32°C, to reduce filament softening and deformation around the extruder gears.
🔹 Store the filament tightly closed in a dry, cool place away from heat and moisture.
🔗 Filament Storage Bags and Moisture-Absorbing Silica
📊 Technical Specifications
🔹 Density: 1.174 g/cm³
🔹 Melt Flow Index: 2.1 g/10min at 190°C / 2.16kg
🔹 Heat Distortion Temperature: 54°C at 0.45 MPa
🔹 Tensile Strength: 13.58 MPa
🔹 Elongation at Break: 39%
🔹 Flexural Strength: 56.72 MPa
🔹 Flexural Modulus: 2786.4 MPa
🔹 IZOD Impact Strength: 3.41 kJ/m²
🧩 Applications
🔹 Decorative and artistic parts.
🔹 Cosplay parts and accessories.
🔹 Toys and models.
🔹 Cultural and creative projects.
🔹 Concept models and rapid prototypes.
🍽️ Food Contact and Safety
🔹 An SGS food-contact compliance report is available for the PLA Basic series.
🔹 EN 71-3 and Food Safety documents are available for the PLA Basic series.
For technical datasheets, printing settings and CubicSky support guides, see:
🔗 3D Printing Materials Settings and Technical Support Guide
📚 Official Sources and Documents
🔗 Official eSUN PLA-Matte Dual Product Page
🔗 PLA-Matte Dual Technical Data Sheet — Version 4.0 — May 2024
🔗 PLA-Matte Dual Safety Data Sheet — V2.0.0.1
🔗 PLA-Matte Dual SGS REACH Report
🔗 PLA-Matte Dual SGS RoHS Report