eSUN PLA-Matte Dual Green Pink is a dual-color matte PLA filament for FDM 3D printing, supplied in 1.75mm diameter with a 1kg net weight. It combines two colors in one filament with a smooth matte surface that reduces the visibility of layer lines.
⭐ A dual-color filament design with a matte finish and a visual effect that changes with model orientation and viewing angle.
Compatible with FDM printers that support PLA, 1.75mm filament and nozzle temperatures up to 230°C, including printers from:
✅ Bambu Lab ✅ Creality ✅ Prusa ✅ Anycubic ✅ ELEGOO ✅ Other Brand
🔹 Bambu Lab: AMS Lite, AMS 2 Pro and AMS HT officially support PLA, subject to spool dimensions required by each system. The original AMS also supports most third-party 1kg spools within suitable dimensions.
🔹 Creality: CFS supports PLA, while the official CFS Lite guide supports PLA and specifically lists third-party spools such as eSUN within the specified spool dimensions.
🔹 Anycubic: ACE Pro and ACE 2 Pro officially support PLA, subject to the supported spool dimensions of each system.
🔹 Prusa: MMU3 officially supports PLA.
📦 Product Information
🔹 Brand: eSUN
🔹 Product: PLA-Matte Dual
🔹 Material: PLA
🔹 Color: Green Pink
🔹 Color Group: Green, Pink, Multicolor
🔹 Diameter: 1.75mm
🔹 Net Weight: 1kg
🔹 Spool Type: Plastic spool.
⭐ Why Choose eSUN PLA-Matte Dual?
🔹 The dual-color filament cross-section produces distinct color changes depending on model orientation and viewing angle.
🔹 A fine matte surface reduces visible layer lines and provides a smooth, consistent appearance.
🔹 Low shrinkage, excellent printability and easy support removal.
🔹 Suitable for artistic models, decorations, cosplay and creative prints.
🔹 Green Pink appears visually as a light mint-like green paired with a vivid fuchsia pink with a slight purple undertone.
⚙️ Printing Settings
🔹 Nozzle Temperature: 215–230°C
🔹 Bed Temperature: 45–60°C
🔹 Fan: 100%
🔹 Print Speed: Up to 200 mm/s
💡 Recommendations and Usage Conditions
🔹 PLA-Matte Dual is softer than some other filaments; avoid excessive extruder tension to maintain stable feeding and printing.
🔹 eSUN recommends keeping the printer enclosure open while printing PLA to reduce excessive filament softening around the extruder gears, particularly in warm environments.
🔹 Store the filament tightly closed in a dry, cool place away from heat and moisture.
🔗 Filament Storage Bags and Moisture-Absorbing Silica
📊 Technical Specifications
🔹 Density: 1.174 g/cm³
🔹 Melt Flow Index: 2.1 g/10min at 190°C / 2.16kg
🔹 Heat Distortion Temperature: 54°C at 0.45 MPa
🔹 Tensile Strength: 13.58 MPa
🔹 Elongation at Break: 39%
🔹 Flexural Strength: 56.72 MPa
🔹 Flexural Modulus: 2786.4 MPa
🔹 IZOD Impact Strength: 3.41 kJ/m²
🧩 Applications
🔹 Decorative and artistic models.
🔹 Cosplay parts and accessories.
🔹 Toys and creative models.
🔹 Concept models and rapid prototypes.
🍽️ Food Contact and Safety
🔹 An SGS food-contact compliance report is available for the PLA Basic series.
🔹 EN 71-3 and Food Safety documents are available for the PLA Basic series.
For technical datasheets, printing settings and CubicSky support guides, see:
🔗 3D Printing Materials Settings and Technical Support Guide
📚 Official Sources and Documents
🔗 Official eSUN PLA-Matte Dual Product Page
🔗 PLA-Matte Dual Technical Data Sheet Version 4.0
🔗 PLA-Matte Dual Safety Data Sheet V2.0.0.1
🔗 PLA Basic EN 71-3 SGS Report
🔗 PLA Basic SGS Food Safety Report
🔗 Bambu Lab AMS Lite Compatibility
🔗 Bambu Lab AMS 2 Pro Compatibility
🔗 Creality CFS Lite Filament Compatibility Guide